| Multiband Comp. |
Adjust the Threshold
downward (-20db down 1 db at a time) till you get a few db
reduction showing up. This is for gluing mixes. Use during
mixing/mastering. |
Download |
| Variverb
|
This is a collection of
great sounding plates, a mono spring, and some personal
Roland RSP550 emulations. |
Download |
| AM-Munition
comp/Lim |
Beside the presets I made
(Glue, Thick Glue, Buss Drum) that are already built into this great
plug-in, here is an additional Mixbuss setup. |
Download |
| AM-Munition
comp/Lim |
Drum buss setup. For
parallel processing. |
Download |
| Samplitude
Version 11 - New EQ116 |
RIAA-recovery-curve.
Record a LP into a sound card and you'll need this
phonographic EQ recovery curve to make it sound correct.
Phase Linear and a great solution. |
Download |
| Stereo Enhancer
(mix Buss) |
3 presets - After spend a
long while looking for a good non-intrusive stereo enhance,
I was brought back to the built in version in Sam since it
did the different things others were doing, and a few other
cool features. |
Download |
|
*New* Analog tape
compression for the Multi-Band Comp |
Made specifically for snare
drum but please try it everywhere, This preset for Sam's
Multiband compressor has the compression curve that tape
gives when hit with percussive material. TO SET
UP. Load on to track before any other plugs and
use the mixers channel input gain to feed the Multiband.
Example; on a snare, set the gain so that on hard hits you
are only seeing a few DBs of compression. |
Download |
| Stereo Enhancer
- From Dec. article |
Presets and Dec. 2010 article |
Link
to DL |
| The Essentials
Collection 1 |
Collection 1 contains the Radio
shack reverb, the 1176, DeltaLabs chorus... |
Link
to DL |
| |
Samplitude 11 Skins |
|
| How to
Setup |
ClarityReadme file
|
View |
| Clarity VIP
Ver 2.0 (Aug 6,2009) |
Our variation off of the
Canis VIP skin and pictured below. Based in Greys and Blues
and without the bright baby blues or bright selections and
ranges. Clean and clear. Download both the VIP and Colors. |
Download |
| Clarity Colors |
Color palette for Clarity
skin - Place these into you Samplitude/fx-presets
folder. Then open Sam and Press Y to get you system menus.
Click on Colors and then load for the preset menu.
Once Clarity is chosen, click on one of the color buttons in
the Object/sample/background Box to open the COLOR palette.
Right click the palette background and choose Clarity to
finish the assignments of colors. This also will setup the
new Color tool in the VIP. |
Download |
| |
|
|
| Birdline |
Birdline Custom Skins
- Samplitude and Sequoia |
HERE |
